boton_distribucion

Kingston DDR3 4Gb 1600MHz ValueRAM CL11

lupa
  • kingston ddr3 4gb 1600mhz valueram cl11
  • kingston ddr3 4gb 1600mhz valueram cl11
Imprimir ficha
REF: A017175
P/N: KVR16N11S8/4
FABRICANTE: Kingston
KVR16N11S8/4 4GB 1Rx8 512M x 64-Bit PC3-12800 CL11 240-Pin DIMM DESCRIPTION This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Entrega 24H/72H
29,40 €
CARACTERÍSTICAS PRINCIPALES:
FACTOR DE FORMA DIMM 240 espigas
CAPACIDAD 4Gb
TIPO DE RAM DDR3
VELOCIDAD 1600Mhz
Nº MODULOS 1
LATENCIA RAM CL11
TENSION 1.5v
COMPATIBLE MAC
ECC
DATOS TÉCNICOS:

KVR16N11S8/4
4GB 1Rx8 512M x 64-Bit PC3-12800
CL11 240-Pin DIMM


DESCRIPTION

This document describes ValueRAM's 512M x 64-bit (4GB)
DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 512M x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR3-1600
timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
contact fingers. The electrical and mechanical specifications
are as follows:

FEATURES

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component

SPECIFICATIONS

CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 35ns (min.)
Maximum Operating Power 2.160 W*
UL Rating 94 V - 0
Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C
*Power will vary depending on the SDRAM used.




Precios Iva incluido con descuento del 2% preaplicado por pago mediante Ingreso o Transferencia.
No incluido: Canon Digital, IGIC, otras tasas legales y Gastos de transporte.
Garantías descritas para particulares, para empresas la garantía es estipulada por cada fabricante.